Predictive Framework Development for User-Friendly On-Site Glucose Detection.

This study explores a smartphone-based spot detection framework for glucose in a rapid, simple, and affordable paper-based analytical device (PAD), which employs machine-learning algorithms to estimate various glucose concentrations. Herein, two different detection mixtures were chosen with chitosan (C) and without chitosan (WC) for the color change analysis. Being a biopolymer, chitosan improves the analytical performance of PADs when used with a chromogenic agent. Moreover, the influence of the illumination conditions and camera optics on the professed color of glucose strips was observed by choosing various illumination conditions and different smartphones. Hence, this study focuses on developing a framework for smartphone-based simple and user-friendly spot-based glucose detection (with a concentration range of 10-40 mM) at any illumination conditions and in any direction of illumination. Additionally, the combination of color spaces and machine-learning algorithms was applied for the signal enhancement. It was observed that the machine learning classifiers, cubic support vector machine (SVM) and narrow neutral network show higher accuracy for the WC samples, which are 92.7 and 92.3%, respectively. The samples with chitosan show higher accuracy for the linear discriminant and quadratic SVM classifiers, which are 94.1 and 93.9%, respectively. Simultaneously, cubic SVM shows ∼93% accuracy for both cases. In order to assess the performance of the devices, a blind test was also conducted. This study demonstrates the potential of the developed system for initial disease screening at the user end. By incorporating machine learning techniques, the platform can provide reliable and accurate results, thus paving the way for estimating the accuracy of the results for improved initial healthcare screening and diagnosis of any disease.

A Chemometric-Assisted Colorimetric-Based Inexpensive Paper Biosensor for Glucose Detection.

This article reports a simple and inexpensive leak-proof paper pad with an initial selection of a paper substrate on the grounds of surface morphology and fluid absorption time. Herein, a drying method is used for glucose detection on a paper pad through colorimetric analysis, and the spot detection of glucose is analyzed by optimizing the HRP concentration and volume to obtain accurate results. The rapid colorimetric method for the detection of glucose on the paper pad was developed with a limit of detection (LOD) of 2.92 mmol L-1. Furthermore, the effects of the detection conditions were investigated and discussed comprehensively with the help of chemometric methods. Paper pads were developed for glucose detection with a range of 0.5-20 mM (apropos to the normal glucose level in the human body) and 0.1-0.5 M (to test the excessive intake of glucose). The developed concept has huge potential in the healthcare sector, and its extension could be envisioned to develop the reported paper pad as a point-of-care testing device for the initial screening of a variety of diseases.

A Review on Gel Polymer Electrolytes for Dye-Sensitized Solar Cells.

Significant growth has been observed in the research domain of dye-sensitized solar cells (DSSCs) due to the simplicity in its manufacturing, low cost, and high-energy conversion efficiency. The electrolytes in DSSCs play an important role in determining the photovoltaic performance of the DSSCs, e.g., volatile liquid electrolytes suffer from poor thermal stability. Although low volatility liquid electrolytes and solid polymer electrolytes circumvent the stability issues, gel polymer electrolytes with high ionic conductivity and enduring stability are stimulating substitutes for liquid electrolytes in DSSC. In this review paper, the advantages of gel polymer electrolytes (GPEs) are discussed along with other types of electrolytes, e.g., solid polymer electrolytes and p-type semiconductor-based electrolytes. The benefits of incorporating ionic liquids into GPEs are highlighted in conjunction with the factors that affect the ionic conductivity of GPEs. The strategies on the improvement of the properties of DSSCs based on GPE are also presented.

Nano-functionalized paper-based IoT enabled devices for point-of-care testing: a review.

Over the last few years, the microfluidics phenomenon coupled with the Internet of Things (IoT) using innovative nano-functional materials has been recognized as a sustainable and economical tool for point-of-care testing (POCT) of various pathogens influencing human health. The sensors based on these phenomena aim to be designed for cost-effectiveness, make it handy, environment-friendly, and get an accurate, easy, and rapid response. Considering the burgeoning importance of analytical devices in the healthcare domain, this review paper is based on the gist of sensing aspects of the microfabricated paper-based analytical devices (µPADs). The article discusses the various used design methodologies and fabrication approaches and elucidates the recently reported surface modification strategies, detection mechanisms viz., colorimetric, electrochemical, fluorescence, electrochemiluminescence, etc. In a nutshell, this article summarizes the state-of-the-art research work carried out over the nano functionalized paper-based analytical devices and associated challenges/solutions in the point of care testing domain.